Hohmann & Barnard PTA Series Anchors - PTA 422

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.

• They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
• PTA Tube is not required with the PTA-422. H&B's NS Neoprene Sponge placed between the concrete block and the PTA-422 allows vertical expansion and contraction.
• PTA Series Anchors are suitable for construction using steel or concrete.

DIMENSIONS/GAUGES

• 12 ga. thick
• Available for 4”-12” block
• Holes 7/16" dia.

AVAILABLE FINISHES

• Hot Dip Galvanized
• Mill Galvanized (Available Upon Request)
• Stainless Steel (Available Upon Request)

LEAD TIME

• There is a production lead time of 14-21 business days on this product.

NOTE

• Special high-load designs can be manufactured on a special order basis contact our technical department for information.
• Anchors are sold by the piece.

RESOURCES

• Submittal
• Safety Data Sheet Hot Rolled Carbon Steel
• Safety Data Sheet Galvanized Steel Sheet
• Safety Data Sheet Hot-Dip Galvanized Coating
• Safety Data Sheet Stainless Steel
• LEED PTA 422