Hohmann & Barnard

NS - Closed Cell Neoprene Sponge is placed horizontally beneath relieving angle, or in the vertical expansion joint to act as a control joint. ...

The 2-SEAL Byna-Lok Wire Tie works in conjunction with the 2-SEAL and the Thermal  2-SEAL Tie. The 2-SEAL Byna-Lok Wire Tie's swaged, overlapping l...

Masonry Direct offers this 2-Seal Tie Chuck Adaptor. FEATURES Drill attachment for 2-seal tie.  Used to install the Hohmann & Barnard 2-Seal T...

***VENEER ANCHOR ONLY, BYNA-LOK HOOK SOLD SEPARATELY*** The 2-SEAL TIE is an innovative single screw veneer tie for metal stud construction Fabric...

Masonry Direct offers this Hohmann & Barnard 2X Hook (350/Box). Compatible With: HB-213 Backplate (Sold Separately) FINISHES Mill Galvanized H...

A seismic clip is welded to the 2X-HOOK to accept either 9 gauge or 3/16" continuous wire. The compressed leg 2X-HOOK has been tested and designed ...

Hohmann & Barnard's SH-Seismic Hook This hook is "swaged" (indented) in two places to accommodate either a 9 gauge or 3/16" continuous wire  A...

For tying masonry to structural columns with 359 Weld-on Ties LENGTHS 12" WIDTHS  6" for 8" Block 8" for 10" Block 10" for 12" Block Additional ...

For tying masonry to structural columns with 359-FH Weld-on Ties LENGTHS 12" WIDTHS  6" for 8" Block 8" for 10" Block 10" for 12" Block Addition...

For anchoring masonry to concrete with dovetail ties (eg. 315 Dovetail Flexible Brick Tie) GAUGES #305 Slot available in 22 or 16 ga. DIMENSIONS ...

For use with #305 Dovetail Slot or anchored directly to backup (NOTE: structural adequacy must be verified by project engineer before surface mount...

341 Series Round Plastic Weep Holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured fro...

342 Rectangular plastic weep holes provide an outlet for water inside a building to move outside the wall and evaporate, they are manufactured from...

The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES Hot Dip Galv. (Standard) Plain Steel  (Sp...

345 Corrugated Buck Anchor for new masonry to concrete, structural steel, existing masonry, or door bucks. GAUGES  16 gauge  AVAILABLE FINISHES ...

The 345-BT Flexible Tie is for tying masonry to concrete or CMU backup with a flexible (not rigid) connection. Comprised of a Vee Byna-Tie® with a ...

359 Weld-on Ties are used in conjunction with the Vee-Byna Tie or the 301W Column Web Tie The systems anchor masonry to the structural frame, whil...

359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie or the 302W Column Web Tie The systems anchor masonry to the structural frame,...

The 360 Gripstay Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor. DIMENSIONS/GAUGES 7-1/2" long (5-1/2" ve...

The 362 - Gripstay Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay Anchor for masonry or ...

The 363 - Flexible Gripstay Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from moving...

The 365 Bent Gripstay Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer bends ava...

***VENEER ANCHOR ONLY, 2X PINTLE HOOK SOLD SEPARATELY*** Adjusto-Tie an innovative single screw veneer tie for metal stud construction with a facto...

The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic t...