Skip to content
DISCOUNTS ON BULK QUANTITIES! FREE SHIPPING ON ORDERS $2,500+
DISCOUNTS ON BULK QUANTITIES! FREE SHIPPING ON ORDERS $2,500+

Termination Bar

A termination bar is a metal strip used to anchor the upper edge of flashing materials against vertical surfaces like parapet walls. It serves to create a secure and watertight seal, preventing water infiltration at critical intersections between masonry and roofing components. Typically made of corrosion-resistant materials, termination bars contribute to effective moisture management in masonry structures.

Filters

  • termination bar lip stainless steel flashing termination bar for securing membrane and sealant edge

    3Gen Masonry Products Termination Bar – Type L (Lip) (8') – Stainless Steel or Aluminum Flashing Termination Bar (200'/Box)

    $163.35 - $196.70
    $163.35 - $196.70
    $163.35 - $196.70
    $163.35
    200.0ft | $0.82 / ft

    TERMINATION BAR (LIP) PROVIDES A SECURE, MECHANICAL ATTACHMENT FOR FLASHING SYSTEMS WHILE ALLOWING PROPER SEALANT APPLICATION AT THE TERMINATION PO...

    View full details
    $163.35 - $196.70
    $163.35 - $196.70
    $163.35 - $196.70
    $163.35
    200.0ft | $0.82 / ft
  • flat termination bar for flashing systems stainless steel or aluminum bar for securing membrane to substrate

    3Gen Masonry Products Termination Bar – Type F (Flat) (8') – Stainless Steel or Aluminum Flashing Termination Bar (200'/Box)

    $176.67 - $326.67
    $176.67 - $326.67
    $176.67 - $326.67
    $176.67
    200.0ft | $0.88 / ft

    TERMINATION BAR (FLAT) PROVIDES A STRONG, CLEAN TERMINATION FOR FLASHING SYSTEMS, SECURING MEMBRANES TO THE SUBSTRATE WITHOUT A LIP PROFILE Termina...

    View full details
    $176.67 - $326.67
    $176.67 - $326.67
    $176.67 - $326.67
    $176.67
    200.0ft | $0.88 / ft
  • Hohmann & Barnard T-1 termination bar for contractors, designed for masonry and stucco wall flashing termination

    Hohmann & Barnard T-1 Termination Bar (25 Pieces/Box)

    $136.03 - $377.42
    $136.03 - $377.42
    $136.03 - $377.42
    $136.03
    200.0ft | $1.06 / ft

    T1 - TERMINATION BAR is used at the top of flashing to secure it to the backup and is compatible with all H&B membrane and copper-laminate flas...

    View full details
    $136.03 - $377.42
    $136.03 - $377.42
    $136.03 - $377.42
    $136.03
    200.0ft | $1.06 / ft
  • York Termination Bar T-96 with sealant lip for contractors, designed for masonry and stucco wall finishing and moisture protection

    York Termination Bar (T-96) With Sealant Lip (25 Pieces/Box)

    $180.95 - $180.95
    $180.95
    $180.95 - $180.95
    $180.95
    200.0ft | $0.90 / ft

    YORK'S TERMINATION BAR (T-96) is a rigid thermoplastic extrusion designed to support vertical flashing material at its termination point. This is a...

    View full details
    $180.95 - $180.95
    $180.95
    $180.95 - $180.95
    $180.95
    200.0ft | $0.90 / ft
  • Hohmann & Barnard T-2 termination bar for masonry and stucco walls, contractor-grade wall edge finishing

    Hohmann & Barnard T-2 Termination Bar (25 Pieces/Box)

    $203.03 - $252.83
    $203.03 - $252.83
    $203.03 - $252.83
    $203.03
    200.0ft | $1.02 / ft

    T2 - Termination Bar features a flange on top for easy caulking and is used at the top of flashing to secure it to the backup. It is compatible wit...

    View full details
    $203.03 - $252.83
    $203.03 - $252.83
    $203.03 - $252.83
    $203.03
    200.0ft | $1.02 / ft
  • A stainless steel termination bar with a pre-drilled hole and a top sealant lip, intended for use with York's flashing products.

    York SS Termination Bar (25 Pieces/Box)

    $330.00 - $330.00
    $330.00
    $330.00 - $330.00
    $330.00
    200.0ft | $1.65 / ft

    York's Stainless Steel Termination Bars are recommended with all of York's flashing products. Made of 26-gauge stainless steel, these bars are pre-...

    View full details
    $330.00 - $330.00
    $330.00
    $330.00 - $330.00
    $330.00
    200.0ft | $1.65 / ft
  • Mortar Net termination bars used to secure and finish the edges of mortar net and flashing in masonry wall assemblies

    Mortar Net Termination Bars

    $125.00 - $665.35
    $125.00 - $665.35
    $125.00 - $665.35
    $125.00
    100.0ft | $1.25 / ft

    Mortar Net’s Termination Bars are available in PVC, stainless steel, and aluminum. Mortar Net always recommends mechanically fastening termination ...

    View full details
    $125.00 - $665.35
    $125.00 - $665.35
    $125.00 - $665.35
    $125.00
    100.0ft | $1.25 / ft
  • York No-Bow Termination Strip for securing masonry veneer and wall cladding, preventing bowing and maintaining alignment

    York No-Bow Termination Strip 2" x 50' (4 Rolls/Box)

    $166.15 - $166.15
    $166.15
    $166.15 - $166.15
    $166.15
    200.0ft | $0.83 / ft

    NO-BOW TERMINATION STRIP RELIABLE PERFORMANCE WITHOUT THE BOW York's No-Bow Termination Strip is a direct replacement for traditional termination b...

    View full details
    $166.15 - $166.15
    $166.15
    $166.15 - $166.15
    $166.15
    200.0ft | $0.83 / ft

Don't see what you're looking for?

Request a special order and get a response from our team within 1 business day.