Henry Air-Bloc 17MR Vapor-Permeable Air & Water Barrier – 5 Gal
Ships in 1–2 business days
LIQUID-APPLIED ELASTOMERIC AIR AND WATER BARRIER WITH VAPOR PERMEABILITY AND MOLD RESISTANCE
Henry Air-Bloc® 17MR is a single-component, water-based, liquid-applied elastomeric membrane designed to provide a vapor-permeable air and water barrier for above-grade wall assemblies. It cures to a tough, monolithic, rubber-like membrane that resists air leakage and water penetration while allowing vapor to pass through the assembly.
Formulated with antimicrobial technology for mold resistance and proprietary fire-resistant technology for NFPA 285 compliance, Air-Bloc® 17MR delivers high-performance protection across a wide range of substrates including gypsum sheathing, CMU, concrete, wood, and metal.
FEATURES
-
Liquid-applied, seamless elastomeric membrane
-
Vapor permeable design allows wall assemblies to dry
-
Antimicrobial formulation for integral mold resistance
-
Proprietary fire-resistant technology for NFPA 285 compliance
-
Excellent adhesion to common construction substrates
-
Low-temperature application down to 20°F (-6°C) without additives
-
Water-based, single-component formula for ease of use
-
Meets high industry performance standards
SIZES / PACKAGING
-
5-gallon pails (18.82 L)
LIMITATIONS
-
Designed for temporary UV exposure up to 180 days; must be covered with cladding
-
Do not expose backside of substrate to moisture or rain
-
Do not apply to wet surfaces
-
Do not apply below 20°F (-6°C) or if temperatures will drop below this within 48 hours
-
Do not apply during rain or if rain is expected within 16 hours
-
In hot or direct sun conditions, rapid drying may cause blistering—use a prime coat or apply in multiple coats as needed
-
Not resistant to oils, grease, or solvents
STORAGE
Store in a well-ventilated area between 39°F (4°C) and 104°F (40°C). Protect from freezing and extreme temperatures during storage and handling.
RESOURCES