Masonry

Permanently Attach Cavity Wall Insulation The Wedge-Lok fastener is a unique, plastic device that uses the principle of leverage to wedge between t...

The Channel-Tee Seismic-Notch Anchor System is ideal for use where maximum vertical adjustability is preferred. The Continuous Channel is surface m...

The beveled head of the askew head bolt engages the internal wedge shape of H&B concrete inserts (LW-340 or HW-340) and produces an automatic t...

LW-340 Long Wedge Insert is suitable for use at the bottom of the slab or when additional vertical adjustability is needed. Wedge inserts are embe...

ENVIRO-BARRIER SILICONE is a silicone air and water-resistive barrier (AWB) that has a 100% silicone coating that is solvent-free, fluid-applied, a...

The 365 Bent Gripstay Channel Slot anchor ties masonry to steel columns, concrete or existing walls The 365 has standard 1" bend. Longer bends ava...

The 363 - Flexible Gripstay Channel Anchor Head permits horizontal and vertical movement of the masonry wall while restraining the wall from moving...

The 362 - Gripstay Channel Slot is furnished with integrally formed end tabs for attachment to masonry. Accepts any Gripstay Anchor for masonry or ...

The 360 Gripstay Channel Slot is welded onto steel web or flange and accepts any type of Gripstay Anchor. DIMENSIONS/GAUGES 7-1/2" long (5-1/2" ve...

For anchoring masonry to concrete with dovetail ties (eg. 315 Dovetail Flexible Brick Tie) GAUGES #305 Slot available in 22 or 16 ga. DIMENSIONS ...

Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless...

Mesh Wall Tie (MWT) for bonding intersecting masonry walls Conforms to ASTM A 153 (Hot-dip Galvanized) Conforms to ASTM E 437, Type 304 (Stainless...

For tying masonry to structural columns with 359-FH Weld-on Ties LENGTHS 12" WIDTHS  6" for 8" Block 8" for 10" Block 10" for 12" Block Addition...

For tying masonry to structural columns with 359 Weld-on Ties LENGTHS 12" WIDTHS  6" for 8" Block 8" for 10" Block 10" for 12" Block Additional ...

359-FH - Weld-on Ties are used in conjunction with the Vee-Byna Tie or the 302W Column Web Tie The systems anchor masonry to the structural frame,...

X-Barrier™ is a sheet applied self-adhesive, membrane to provide an air and water barrier when applied to above grade wall assemblies. X-Barrier is...

The Torq-Lok mechanical anchoring system is an easy to use and cost effective method to re-connect existing veneers to various substrates. The proc...

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical de...

PTA 310 HS is a heavy-duty version of our PTA 310 Partition Top Anchors, developed to provide lateral shear resistance at the upper limit of maso...

The 344 - Rigid Partition Anchor is for anchoring load bearing walls at intersections AVAILABLE FINISHES Hot Dip Galv. (Standard) Plain Steel  (Sp...

HB-213 Insulation Washer is designed to mechanically fasten rigid insulation board to backup structure. Used with the HB-213 Veneer Anchor. DIMEN...

New masonry veneer can be anchored to studs, existing masonry, concrete or steel with the Byna-Lok Wire Tie. Various H&B Anchor systems can be ...

Used as a protective cover for bolts, pipes, rebar and other protrusions that could be potentially hazardous. This product is not intended to elimi...

***X-SEAL® ANCHOR ONLY, VEE BYNA-TIE SOLD SEPARATELY*** The X-SEAL Anchor meets or exceeds requirements of the Commonwealth of Massachusetts State...